Panasonic TX-L50B6E - TV Connections; Basic Connection Setup

6
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.
1 Remove the assembly screws
.
2 Pull out the pedestal from the TV.
3 Remove the assembly screws from the bracket.
Connections

External equipment and cables shown are not supplied with this TV.

Ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.

Check the type of terminals and cable plugs are correct when connecting.

Always use a fully wired SCART or HDMI cable.

Keep the TV away from electronic equipment (video equipment, etc.) or equipment with an infrared sensor.
Otherwise, distortion of image / sound may occur or operation of other equipment may be interfered.

Also read the manual of the equipment being connected.
Terminals
7
8
4
6
5
2
1
3
1
CI slot (p. 8)
2
Headphone jack (p. 8)
3
USB port
4
HDMI1 - 2 (p. 7, 8)
5
Terrestrial / cable terminal
(see below)
6
AV1 (SCART) (p. 7)
7
AV2 (COMPONENT / VIDEO)
(p. 7)
8
DIGITAL AUDIO
Basic connections
Mains lead and aerial
Cable
 DVB-C, DVB-T, Analogue
AC 220-240 V
50 / 60 Hz
Mains lead
(supplied)
Terrestrial aerial
RF cable
 Mains lead
Insert the mains plug firmly into place.

When disconnecting the mains lead, be absolutely sure to
disconnect the mains plug at the socket outlet first.