E
NGLISH
12
2. Bend the frame inwards and pull it off from the side cover.
If it is diffi cult to pull off, insert a fl at-blade (minus
)
screwdriver and pry open it.
3. Pull off the battery and separate it from the 3D Eyewear by
cutting off the wires, one by one, with scissors.
Insulate the wire parts of the removed battery with
cellophane tape.
Battery
NOTE
• Take suffi cient care when performing this work so as not to injure
yourself.
• Do not damage or dismantle the battery.
3DE4_E.indb 123DE4_E.indb 12 1/23/2012 2:38:32 PM1/23/2012 2:38:32 PM
To Next Page
Loading...
