Panasonic U-100PE1E5 - Page 631

5-23
5
E12Automatic Address Setting Start is Prohibited while Auto-address Setting in Progress.
Error Detection Method
Error Diagnosis
It is judged an error if a command to start auto address setting comes from another controller during auto address setting.
1.
2.
1
This occurs in a system that has more than one outdoor unit and operating lines among the indoor/outdoor units
(networked wiring), when an instruction to start auto address setting is given from another controller during the auto
address setting process.
•
When one controller in a networked system is running auto address setting, it is not possible
to start auto address setting from another controller.
Wait until the auto address setting in progress finishes.
1-1
Auto
Address
SM830211-07PAC-i.indb23SM830211-07PAC-i.indb23 2013/09/0710:42:062013/09/0710:42:06