What does it mean if is displayed on my Panasonic U-71PZH2E8 remote controller?
If is displayed on the remote controller, it indicates that nanoe™ X is considered abnormal. In this case, it is recommended to contact your dealer.
Why is my Panasonic Air Conditioner making noise during heating operation?
The noise you hear during heating operation is likely due to the defrost operation being in process.
Why does my Panasonic Air Conditioner fan continue to rotate after I turn it off?
The fan continues to rotate after stopping the Panasonic Air Conditioner with the remote controller for smooth operation.
Why is dust coming out of my Panasonic U-71PZH2E8?
The dust is discharged because it has accumulated inside the indoor unit.
Why does my Panasonic Air Conditioner fan keep rotating for a while even after I stop it?
The fan may continue to rotate to dry the heat exchanger, depending on the setting.
What to do if is not displayed on my Panasonic Air Conditioner remote controller?
Check if nanoe™ X has been set to OFF. If it has, set it to ON.
Why does my Panasonic U-71PZH2E8 Air Conditioner change the airflow direction by itself?
The airflow direction may change automatically during heating operation if the air discharge temperature is low, or during defrost operation, resulting in a horizontal wind flow.
What does it mean when my Panasonic U-71PZH2E8 makes a humming noise?
The humming noise you hear is the sound of nanoe™ X being discharged.
Why is my Panasonic Air Conditioner discharging dust?
Dust discharge may occur if dust has accumulated inside the indoor unit. Ensure that nanoe™ X is set to ON. If nanoe™ X is already ON, it may be considered abnormal, and you should contact your dealer.
Why does my Panasonic U-71PZH2E8 Air Conditioner sound like streaming water?
The sound of streaming water is the sound of refrigerant liquid flowing inside the unit.
Covers precautions for use, installation, and general safety warnings.
Addresses troubleshooting and steps before requesting service.
Guidance on proper installation procedures and electrical wiring connections.
Common symptoms and causes for indoor and outdoor unit problems.
Troubleshooting steps for non-operation or poor cooling/heating.
General| Cooling Capacity (kW) | 7.1 |
|---|---|
| Heating Capacity (kW) | 8.0 |
| Refrigerant | R32 |
| Cooling Capacity | 7.1 kW |
| Heating Capacity | 8.0 kW |
| Coefficient of Performance (COP) | 3.61 |
| Indoor Unit Weight | 14 kg |
| Power Supply | 220-240 V, 50 Hz |
To Next Page