Panasonic VDR VDR-D220 - Adjusting LCD Monitor;Viewfinder

39
LSQT1146
Setup
Adjusting LCD monitor/
viewfinder
1
Press the MENU button, then
select [SETUP] # [LCD SET] or
[EVF SET] # [YES] and press the
joystick.
2 Move the joystick up or down to
select the item to be adjusted.
Then, move the joystick left or
right to make the adjustment.
The bar display moves.
∫ [LCD SET]
[BRIGHTNESS]:
Brightness of the LCD monitor
[COLOR]:
Color level of the LCD monitor
∫ [EVF SET]
[BRIGHTNESS]:
Brightness of the viewfinder
≥ To adjust the brightness of the viewfinder,
extend the viewfinder and close the LCD
monitor to activate the viewfinder.
≥ When the LCD monitor is rotated by 180°
towards the lens, the brightness and color level
of the LCD monitor cannot be adjusted.
≥ These settings will not affect the images
actually recorded.
Adjust the focus by sliding the
eyepiece corrector knob.
Adjusting the brightness and
color level
MENU
Adjusting the field of view
0h00m00s
0h00m00s
0h00m00s
0h00m00s
LSQT1146.book 39 ページ ２００６年１２月５日 火曜日 午前１０時４０分