30
SQT0852
No power.
Ensure the AC mains lead of the active
subwoofer is connected properly.
After turning the subwoofer on, it
immediately turns off.
Unplug the AC mains lead and consult your
dealer.
No sound from the subwoofer.
≥ Check that the active subwoofer is turned on.
≥ Check that the WIRELESS LINK indicator
lights green. (> 19)
The WIRELESS LINK indicator lights red.
≥ There is no link between the main unit and the
active subwoofer.
jCheck that the main unit is turned on.
jTurn the active subwoofer off and then back
on. Alternatively, turn the active subwoofer
off, disconnect the AC mains lead and then
reconnect it.
≥ The active subwoofer and the main unit may
not be paired correctly. Try the following
operation. (Wireless pairing)
1 Turn on the main unit and active
subwoofer.
2 Press and hold [I/D SET] on the rear of the
active subwoofer for more than 3 sec.
(The WIRELESS LINK indicator will blink in
red.)
3 While pressing and holding [INPUT] on
remote control, touch and hold [VOL i] on
the main unit for more than 4 sec.
(“SUBWOOFER PAIRING” will be
indicated on the display.)
≥ When the wireless pairing is successful,
“PAIRED” will be indicated on the display for
2 sec and WIRELESS LINK indicator lights
green.
4 Turn the main unit off and on.
≥ Consult your dealer if the problem persists.
Active Subwoofer
SC-HTB690-SQT0852.book 30 ページ ２０１５年１月３０日 金曜日 午後２時２分
To Next Page
Loading...
