Connections
●
External equipment and cables shown are not
supplied with this
TV.
●
Please ensure that the unit is disconnected from the
wall out before attaching or disconnecting any cables.
●
Check the terminal type and cable plugs are correct
for connection.
●
Use a fully wired HDMI compliant cable.
●
Keep the TV away from electronic equipment (video
equipment, etc.) or equipment with an infrared sensor
,
otherwise distortion of image / sound may occur or
operation of other equipment may be affected.
●
Please also read the manual of the equipment being
connected.
●
Please refer to eHELP for other connections (VIERA
Link connection etc.).
Connection Panels
3
4567
1
2
Back of the TV
1 USB 1/2
2 HDMI 3
3 Component/Video terminal
4 Ethernet connector
5 Antenna cable in
6 Digital audio out
7 HDMI 1/2
VHF/UHF Antenna
•
NTSC (National Television System Committee):
Analog television system
•
ATSC (Advanced Television Systems Committee):
Digital TV Standards include digital high-definition
television (HDTV), standard-definition television
(SDTV), data broadcasting, multi-channel surround
sound audio and interactive television.
Power cord connection
Power Cord
Connect after all other connections have been made.
Back of the TV
Insert the power cord plug firmly into place.
Important:
●
Disconnect the power cord plug
from the wall out first.
●
The included power cord is for use
with this unit only
.
Antenna connection
Back of the TV
VHF/UHF Antenna
or
Cable TV
Cable
●
You need to subscribe to a cable TV service to enjoy
viewing their programming.
●
A high-definition connection can be made using an
HDMI or Component V
ideo cable. (p. 18)
Note
●
When using a Cable box, external equipment and
video cables shown in this manual are not supplied
with the
TV.
17
English
To Next Page
Loading...
