20
With the connected equipment turned On
Display the Input select menu
Select the input mode
Input select
ANT/Cable In
1
2
3
4
5
HDMI 1
HDMI 2
Video
GAME
Component
AUX
Not used
(example)
Input label
or
select
enter
Setup ANT/Cable (p. 30)
Edit Device labels
Input labels (p. 36)
(shortcut) press the corresponding
NUMBER button on the remote
control to select the input of your
choice. Or, press the INPUT
button repeatedly, to cycle through
the available inputs.
* set unused input to “Not used”
(below) for quick skipping.
Select the input of your choice,
then press OK.
HDMI 1
GAME
Terminal
(example)
Label
●
During the selection, if no action
is taken for several seconds,
the “Input select” menu
disappears.
●
The terminal and label (names)
of the connected equipment are
displayed.
Note
●
The input label will be displayed on the “Input select” screen if the Input label was
customized.
Operate the connected equipment directly or using the
remote control supplied with the equipment
Note
●
For details, see the manual for the connected equipment.
Watching content from external devices
To Next Page
Loading...
