First Time Setup (Continued)
Select the Input labels (Label inputs)
Select NEXT then press OK to go to next step.
or
Follow the instructions on
screen to complete the
following operations.
Label: [BLANK] Not used/Blu-ray/DVD/DVD REC/HOME THTR/GAME/COMPUTER/
VC R/CABL E/SAT ELLITE/DVR/CAM ERA/M ON ITO R/AUX/RE C EIVE RIM EDIA
CTR/MEDIA EXT!OTHER
Adjust the Clock (Set clock)
Select NEXT then press OK to go to next step.
or _= MinLIte L_
Follow the instructions on
screen to complete the
following operations.
Complete the First time setup
Completion message is displayed when you successfully completed the First
time setup.
@About broadcasting
systems
Analog (NTSC):
Conventional
broadcasting
Digital (ATSC):
New
programming
that allows
you to view
more channels
featuring
high-quality video
and sound
Watching TV
Basic connection (p. 11-12)
Turn power on
(Remote) (TV)
POWER POWER
or
INPUT
@ If the mode is not TV, press _ and select TV. (p. 24)
Select a channel number
(Remote)
BBB
RD_
or H till B
(TV)
• To directly enter the digital channel number
| When tuning to a digital channel,
press the button to enter the
minor number in a compound
channel number.
example: CH15-1 U _ |
@ Reselect "Cable" or "Antenna" in "ANT in" of "ANT/Cable setup" to switch the signal
reception between cable TV and antenna. (p. 15, 37)
@ The channel number and volume level remain the same even after the TV is turned
off.
@@
_-q._
,-t- O
_-!._-z.
r-
-o
16 17
To Next Page
Loading...
