How to Use Menu Functions
32
• Menu list
Menu Item
Reset to defaults*
F_icture mode
Contrast, Brightness,
Color, Tint, Sharpness
).
Color mgmt.
x.v.Color
Photo enhancement
C.A.T.S.
Video NR
Blur reduction
Pro settings
Screen format
HD size
H size
Zoom
ustments
ustments
HDMI/DVI RGB range
(HDMI 1-3)
3D Y/C filter
Color matrix
Block NR
uito NR
Black level
oulldown
24p Direct in
Reset to defaults*
Adjustments/Configurations (alternatives)
Resets all picture adjustments to factory default settings except for "Advanced picture".
Basic picture mode (VividlStandardlTHXIGamelCustom) (p. 55)
Adjusts the color, brightness, etc. for each picture mode to suit your taste
Display range
ContrastlBrightnesslColorlSharpness:O - 100
Tint: -50 - +50
Selectsa choiceof Cool (blue), Normal,or Warm (red) color.(Cool 210ool l/Normal/Warm l/Warm 2)
On: Enhances green and blue color reproduction, especially outdoor scenes. (Off/On)
Auto: Provides the appropriate picture when images corresponding to "x.v.Color" are input
via the HDMI input of this TV. (Off/Auto)
Provides appropriate picture when still images are input. (On/Off)
"x.v.color" will not work if "On" is set.
Adjusts the brightness and gradation according to the ambient lighting condition. (Off/On)
Reducesnoise,commonlycalledsnow.Leaveit offwhenreceivinga strongsignal.(Off/Weak/Medium/Strong)
Improves the moving picture resolution. (Off/On)
ust the "Picture mode" settinc in more detail. (p. 55)
f when "Custom" or "Photo" is selected._
as the format (aspect ratio). (FULLIH-FILLIJUSTI4:31ZOOM)
choose the as_ on the format of received si hal. ( . 53)
Selects between 95 % (Size 1) or 100 % (Size 2) for the scanning area with High-definition
signal. (Size l/Size 2)
Select "Size 1" if noise is generated on the edges of the screen.
Size 1: Selected item for "HD size". Scanning 95 %
Size 2: Selected item for "HD size". Scanning 100 %
Adjusts the horizontal display range to reduce noise of both side edges of an image.
Size l/Size 2)
usts the image size according to the aspect mode to reduce noise. (p. 56)
Adjusts vertical alignment and size when aspect setting is "ZOOM"
Sets PC display (p. 30)
Prevents the blown out highlights and blocked up shadows when a wide-range signal is received.
Selects between standardRGB range (16-235 bits) or non-compliance (0-255 bits).
(Auto/Standard (16-235)/Nonstandard)
Auto:Switchesthe RGBranqe(Standard(16-235)/Nonstandard)dependinqonthe HDMIsiqnalinformation.
Minimizes noise and cross-color in the picture. (Off/On)
Selects image resolution of component-connected devices (SD/HD)
SD: Standard Definition HD: High Definition
used with 480p video signal.
Reduces noise of specific digital signals of DVD, STB, etc. (Off/On)
Reduces HDTV flicker noise in the contoured sections of an image (Off/On)
Selects Dark or Light. Valid only for external input signals. (Dark/Light)
Adjusts the picture recorded in 24 fps for optimum quality. (Off/On/Auto)
48Hz: Achieves more cinematic playback by reproducing the movie contents at twice the
speed of 24 frames per second. (60Hz/48Hz)
Resets Bass, Treble, and Balance adjustments to factory default settings.
Bass Increases or decreases the bass response.
Treble Increases or decreases the treble response.
Balance Emphasizes the left / right speaker volume.
A.I. sound Equalizes overall volume levels across all channels and external inputs. (Off/On)
Surround Enhances audio response when listening to stereo. (Off/On)
Bass boost Enhances bass sound and provides powerful sound. (Off/On)
Volume leveler Minimizes volume disparity after switching to external inputs.
Switches to "Off" when using external speakers (Off/On)
TV speakers ÷ "A.I. sound", "Surround", "Bass boost" and "Volume leveler" do not work if "Off" is selected.
HDMI 1 in The default setting is "Digital" for the HDMI connection. (Digital input signal)
HDMI 2 in Select audio input terminal when DVI cable is connected. (Analog audio input signal)
HDMI 3 in (Digital/Component l/Component 2/Video 1Nideo 2)
Sleep, Timer 1-5 The TV can automatically turn On/Off at the designated date and time. (p. 50)
To Next Page
Loading...
