How to Use Menu Functions
Advanced
27
Menu Item Adjustments / Configurations (alternatives)
Sound
MPX
Selects multiplex sound mode (if available) (p. 68)
Normally : Stereo
Stereo signal cannot be received: Mono
M1 / M2 : Available while mono signal is transmitted
Analogue TV mode only
Digital Audio
Preference
Selects the initial setting for audio tracks (Dolby D / HE-AAC)
Dolby D : The priority is given in the following order - Dolby Digital,
HE-AAC, MPEG1.
HE-AAC :
The priority is given in the following order - HE-AAC, MPEG1, Dolby Digital.
Dolby Digital is the method of coding digital signals developed by Dolby
Laboratories. Apart from stereo (2ch) audio, these signals can be multi-
channel audio.
HE-AAC is a perceptual coding method used to compress digital audio
for efficient storage and transmission.
MPEG1/Layer-2 is an audio compression method that compresses
audio to the smaller size without any considerable loss of audio quality.
Digital TV mode only
SPDIF Selection
SPDIF : A standard audio transfer file format
Selects the initial setting for digital audio output signal from DIGITAL
AUDIO OUT terminal (Auto / PCM)
Auto : Dolby Digital is output as Dolby Digital Bitstream. HE-AAC and
MPEG are output as PCM.
PCM : Digital output signal is fixed to PCM.
For Digital TV mode or Video mode (p. 48)
MPEG Optical
Level
Adjusts the audio level of MPEG output from DIGITAL AUDIO OUT
terminal as the initial setting (0 / -2 / -4 / -6 / -8 / -10 / -12dB)
Normally, MPEG sound is louder comparing with the other types of audio track.
Digital TV mode only
HDMI1 / 2 / 3
Input
Select to fit the input signal (Digital / Analogue) (p. 69).
Digital : HDMI cable connection
Analogue : HDMI-DVI adaptor cable connection
HDMI input mode only
Reset Sound
Defaults
Press the OK button to reset the present settings of Mode, Balance,
Headphone Volume, and Surround in Sound Menu to the default.
Setup
PC Setup
Input
Resolution
Switches to a wide view
VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
XGA (1,024 × 768 pixels), WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)
Options change depending on signals
Clock Set to the minimum level if noise occurs.
H-pos
Adjusts horizontal position
V-pos
Adjusts vertical position
Clock Phase
Eliminates flicker and distortion
Adjust after Clock adjustment
Set to the minimum level if noise occurs
Sync
PC sync signal type (H & V / SOG)
H & V : by the horizontal and vertical signals from your PC
SOG : Sync on Green sync from your PC
Reset PC Settings
Press the OK button to reset the present PC Setup settings to the default.
DVI Position
Setting
H-pos Adjusts horizontal position settings of DVI
V-pos Adjusts vertical position settings of DVI
Reset DVI
Position
Settings
Press the OK button to reset the present DVI Position settings to the
default.
Off Timer
Sets the time the TV automatically goes to Standby mode
(Off / 15 / 30 / 45 / 60 / 75 / 90 minutes)
To Next Page
Loading...
