Panasonic VIERA TH-L32D25Z

68
When you receive the stereo / bilingual sound system, sound output modes can be selected
by pressing the Stereo / Bilingual Sound Selection button.
Audio Signal STEREO
MAIN
I
SUB
II
MONO
Mode Indicator
I II
NICAM .......Used in New Zealand, Singapore, Hong Kong etc.
Type of broadcast
Regular broadcast
(Standard Audio)
Regular + NICAM MONO
I
(MAIN
I
)
NICAM STEREO
NICAM DUAL MONO
(MAIN
I
/ SUB
II
)
Mode Indicator
No Indicator
I
I
II
A2 (German) .......Used in Australia, Malaysia etc.
Type of broadcast
Regular broadcast
(Standard Audio)
BILINGUAL or DUAL MONO:
MAIN
I
/ SUB
II
STEREO
Mode Indicator
No Indicator
I
II
If the stereo signal is poor or the receiving conditions are not optimum or if STEREO:MONO

automatic switching occurs, it is recommended you switch from STEREO to MONO.
Even when the contents of the receiving signal undergo changes, selection mode is kept intact.

When the receiving conditions deteriorate, listening will be easier if the mode is set to the MONO

position, using the stereo / bilingual sound selection button.
DUAL, also known as DUAL MONO or as BILINGUAL is not currently transmitted in some

countries.
Stereo / Bilingual Sound Selection (Analogue TV mode)
Technical Information
CH Display / Receive Channel
CH 1 - CH 11 CH 21 - CH 70 CH 74 - CH 78 CH 80 - CH 120
Rating Meaning
No Block Not classified
G General
PGR Parental Guidance Recommended
AO Adults Only
Channel Allocation (Analogue TV mode)
Rating (Digital TV mode)