Using Network Services
63
Network settings for the LAN Cable connection
This setting is for the network connection by using the LAN cable.
1
Select [Network Type] and set to [Wired]
---
12-34-56-78-9a-bc
Connection Test
Network Type
Access Point Settings
IP/DNS Settings
Network Link Settings
MAC Address
Network Setup
Wired
Software Update
access / store
select
If you make the network connection like [Example2] (p. 61),
you do not have to set [DNS Address], [Proxy] and
[Proxy Port].
2
Select [IP/DNS Settings] and set the items
---
12-34-56-78-9a-bc
Connection Test
Network Type
Access Point Settings
IP/DNS Settings
Network Link Settings
Software Update
Network Setup
Wired
Access
MAC Address
access
select
After settings, return to [Network Setup] screen
RETURN
■ [Acquire IP Address]
■ [Acquire DNS Address]
Sets [IP Address], [Subnet Mask], [Gateway] and [DNS Address].
For most users, the recommended method of connection to your network is by using [Auto] feature.
Select [Acquire IP Address] and then set to [Auto]
Select [Acquire DNS Address] and then set to [Auto]
Acquire IP Address Auto
192.168.11.5
255.255.255.0
192.168.11.1
192.168.11.1
IP Address
Subnet Mask
Gateway
Acquire DNS Address
DNS Address
Proxy Settings
IP/DNS Settings
Auto
access / store
select
•
The available settings are displayed automatically.
To Next Page
Loading...
