50
Technical Information
When you receive the stereo / bilingual sound system, sound output modes can be selected
by pressing the Stereo / Bilingual Sound Selection button.
Audio Signal STEREO
MAIN
I
SUB
II
MONO
Mode Indicator
I II
NICAM .......Used in New Zealand, Singapore, Hong Kong etc.
Type of broadcast
Regular broadcast
(Standard Audio)
Regular + NICAM MONO
I
(MAIN
I
)
NICAM STEREO
NICAM DUAL MONO
(MAIN
I
/ SUB
II
)
Mode Indicator
No Indicator
I
I
II
A2 (German) .......Used in Australia, Malaysia etc.
Type of broadcast
Regular broadcast
(Standard Audio)
BILINGUAL or DUAL MONO:
MAIN
I
/ SUB
II
STEREO
Mode Indicator
No Indicator
I
II
●
If the stereo signal is poor or the receiving conditions are not optimum or if STEREO:MONO
automatic switching occurs, it is recommended you switch from STEREO to MONO.
●
Even when the contents of the receiving signal undergo changes, selection mode is kept intact.
●
When the receiving conditions deteriorate, listening will be easier if the mode is set to the MONO
position, using the stereo / bilingual sound selection button.
●
DUAL, also known as DUAL MONO or as BILINGUAL is not currently transmitted in some
countries.
CH Display / Receive Channel
CH 0 - CH 5 S 2 - S 10 CH 5A CH 6 - CH 9
CH 9A CH 10 - CH 12 S 11 - S 44 CH 20 - CH 75
Rating Meaning
Rating Meaning
No Block Not classified M Mature
P Pre school MA 15+ Mature Adult 15+
C Children AV 15+ Adult strong Violence 15+
G General R Restricted 18+
PG Parental Guidance recommended
Channel Allocation (Analogue TV mode)
Rating (Digital TV mode)
Stereo / Bilingual Sound Selection (Analogue TV mode)
TH-L32U20A_EN.indb 50TH-L32U20A_EN.indb 50 2/22/2010 4:09:15 PM2/22/2010 4:09:15 PM
To Next Page
Loading...
