Technical Information
42
Technical Information
Channel Allocation (Analogue TV)
CH Display / Receive Channel
CH 0 - CH 5 S 2 - S 10 CH 5A CH 6 - CH 9
CH 9A CH 10 - CH 12 S 11 - S 44 CH 20 - CH 75
Rating (Digital TV)
Rating Meaning Rating Meaning
- (No Block) Not classified M Mature
P Pre school MA 15+ Mature Adult 15+
C Children AV 15+ Adult strong Violence 15+
G General R Restricted 18+
PG Parental Guidance recommended
Stereo / Bilingual Sound Selection (Analogue TV)
When you receive the stereo / bilingual sound system, sound output modes can be selected by pressing the
Sound Selection button.
Audio Signal STEREO MAIN I SUB II MONO
Mode Indicator
NICAM .......Used in New Zealand, Singapore, Hong Kong, etc.
Type of broadcast
Regular broadcast
(Standard Audio)
Regular + NICAM MONO I
(MAIN I)
NICAM
STEREO
NICAM DUAL MONO
(MAIN I / SUB II)
Mode Indicator
No Indicator
I
II
A2 (German) .......Used in Australia, Malaysia, etc.
Type of broadcast
Regular broadcast
(Standard Audio)
BILINGUAL or DUAL MONO:
MAIN I / SUB II
STEREO
Mode Indicator
No Indicator
●
If the stereo signal is poor or the receiving conditions are not optimum or if STEREO:MONO automatic switching
occurs, it is recommended you switch from STEREO to MONO.
●
Even when the contents of the receiving signal undergo changes, selection mode is kept intact.
●
When the receiving conditions deteriorate, listening will be easier if the mode is set to the MONO position, using the
Sound Selection button.
●
DUAL, also known as DUAL MONO or as BILINGUAL is not currently transmitted in some countries.
To Next Page
Loading...
