12
English
Headphones
To adjust volume
[Headphone Volume] in the Sound Menu
To select the sound output to adjust volume
[Speaker Setting] in the Sound Menu
TV
(M3 stereo mini plug)
Common Interface
Turn the TV off with Mains Power On / Off switch
whenever inserting or removing the CI module.
If a smart card and a CI module come as a set, first
insert the CI module, then insert the smart card into
the CI module.
Insert or remove the CI module completely in the
correct direction as shown.
Normally encrypted channels will appear. (The
viewable channels and its features depend on the CI
module.)
If encrypted channels do not appear
[Common Interface] in the Setup Menu
There might be some CI modules in the market
with older firmware versions that do not work fully
interoperable with this new CI+ v1.3 TV. In this case,
please contact your content provider.
For more information, refer to [eHELP] (Functions >
Common Interface), read the manual of the CI
module, or check with the content provider.
TV
CI module
Communication Camera
Use USB 1 for connecting the Communication
Camera.
For more information, refer to [eHELP] (Support >
Optional accessories > Communication Camera).
USB HDD (for recording)
Use USB 3 for connecting the USB HDD.
For more information, refer to [eHELP] (Recording).
VIERA Link
Use HDMI1 - 3 for VIERA Link connection.
For more information, refer to [eHELP] (Functions >
VIERA Link “HDAVI Control™”).
To Next Page
Loading...
