Watching TV
21
Hold
Freeze / unfreeze picture
Display the selectable settings for the current status
Confirm or change the current status instantly
To change
select
access
select / change
store
[Multi Video] (DVB)
Selects from a group of multiple
videos (if available)
This setting is not memorised
and it will return to the default
setting once you exit the current
programme.
[Multi Audio] (DVB)
Selects between alternative
language for sound tracks (if
available)
This setting is not memorised
and it will return to the default
setting once you exit the current
programme.
[Dual Audio] (DVB)
Selects stereo / monaural (if
available)
[Sub Channel] (DVB)
Selects the multifeed programme -
sub channel (if available)
[Subtitle Language] (DVB)
Selects the language in which
subtitles should appear (if available)
[Teletext Character Set]
Sets the teletext language font
(p. 38)
[Teletext Language] (DVB)
Selects between alternative
language for teletext (if available)
[MPX] (Analogue)
Selects multiplex sound mode (if
available)
(p. 34)
[Volume Correction]
Adjusts volume of individual channel or
input mode
Off Timer
Turn the TV to Standby mode automatically after a fixed period
Press the button repeatedly until you reach the desired time.
([Off] / [15] / [30] / [45] / [60] / [75] / [90] (minutes))
To cancel, set to [Off] or turn the TV off.
To confirm the remaining time “Display Information banner” (p. 20)
When the remaining time is within 3 minutes, the remaining time will flash on the screen.
You can also set the [Off Timer] via the [Timer] menu
1 Display the menu
2 Select [Timer]
Timer
select
access
3 Select [Off Timer] and set the time in 15-minute increments
15
30
45
60
75
90
Off
minutes
Timer Programming
Off Timer
Auto Standby
minutes
minutes
minutes
minutes
minutes
select [Off Timer]
access
select the time
store
To Next Page
Loading...
