Panasonic Viera TX-L32EM5E

Technical Information
50
Technical Information
Auto Aspect
The optimum size and aspect are based on programmes signal format, and you can enjoy finer images. (p. 18)
 Aspect Control Signal
The aspect will switch to the appropriate widescreen ratio.
Input terminal Input signal format
Aspect Control Signal
Widescreen signal
(WSS)
Control signal
through SCART (pin8) /
HDMI terminal
Cable
RF
DVB-C
DVB-T
PAL B, G, H, I, D, K
SECAM B, G, L, L’, D, K
PAL 525/60 6.5 MHz –
PAL 525/60 6.0 MHz –
PAL 525/60 5.5 MHz –
M.NTSC 6.5 MHz –
M.NTSC 6.0 MHz –
M.NTSC 5.5 MHz –
AV1 / AV2
(Composite)
PAL
SECAM
PAL 525/60 –
M.NTSC –
NTSC –
AV2
(Component)
525 (480) / 60i, 60p –
625 (576) / 50i, 50p
750 (720) / 60p, 50p –
1,125 (1,080) / 60i, 50i –
HDMI1
HDMI2
525 (480) / 60i, 60p –
625 (576) / 50i, 50p –
750 (720) / 60p, 50p –
1,125 (1,080) / 60i, 50i –
1,125 (1,080) / 60p, 50p, 24p –
 Auto mode
Auto mode determines the best aspect ratio based on programmes signal format (WSS, Control signal through
SCART / HDMI terminal).
This process may take several minutes, depending on the darkness of the image.
Note

The ratio varies depending on the programme, etc. If the ratio is out of the standard 16:9, black bands at the top and
bottom of the screen may appear.

If the screen size looks unusual when a widescreen-recorded programme is played back on a VCR, adjust the
tracking of the VCR. Read the manual of the VCR.