How to Use Menu Functions
28
Menu
Item Adjustments / Configurations (alternatives)
Setup
Off Timer
Sets the time until the TV automatically goes to Standby mode
[Off] / [15] / [30] / [45] / [60] / [75] / [90] (minutes) (p. 16)
Link Settings
CEC
The TV automatically switches to the appropriate HDMI input whenever an HDMI
connected equipment start playing [Off] / [On]
Power off Link
When the TV is set to Standby mode, the connected equipment is also
automatically set to Standby. [Off] / [On]
A Panasonic DVD Recorder will not turn off if it is still in the Rec mode.
The TV remains on even if all the HDMI connected equipment are turned off.
Child Lock Locks a channel / AV input to prevent access to it (p.
36)
Tuning Menu
TV Selection Selects the type of signal you want to tune [Antenna] / [Cable]
Automatic Channel
Search
Automatically searches for the receivable channels (p. 31 - 32)
Scan Adds newly found channels while keeping existing channels (p. 33)
Analogue Manual
Tuning
Searches for the analogue channels manually (p. 33)
DVB-T Manual
Tuning
Searches for the DVB-T channels manually (p. 34)
DVB-C Manual
Tuning
Searches for the DVB-C channels manually (p. 34)
Favourite Network
Select
Selects your favourite network for each broadcasters (only available in some
countries)
For DVB mode
Favourites Edit Creates a list of favourite channels (p. 34)
Skip Skips unwanted channels (p. 34)
Sort Sorts channels (p. 35)
Channel List Edit Edits channels (p. 35)
Clear block Clears the channel lists (p. 35)
Language Changes language for on-screen displays (p. 13)
To Next Page
Loading...
