How to Use Menu Functions
30
Menu
Item Adjustments / Configurations (alternatives)
Setup
Other Settings
Auto Standby
Sets the duration of time that the TV will remain on when no operation is
performed [Off] / [2] / [4] (hours)
Automatic input switching with the connected equipment affects this function
and time-count will be reset.
The notification message will appear 3 minutes before going into Standby mode.
Power Save Reduces brightness of picture to economise on power consumption [Off] / [On]
16:9 Overscan
Selects the screen area displaying the image [Off] / [On]
[On]:
Enlarges the image to hide the edge of the image.
[Off]:
Displays the image in the original size.
Set to [On] if noise is generated on the edge of the screen.
This function is available when aspect is set to [Auto] (16:9 signal only) or
[16:9].
This function can be memorised separately for SD (Standard definition) and HD
(High definition) signals.
Time Zone
Adjusts the time data
The time data will be corrected based on GMT.
Set to [Auto] to adjust the time automatically according to your area.
Time
Auto
Synchronization
Selects synchronization method [On] / [Off]
[On]:
Based on the bitstream time.
[Off]:
Based on the setting time.
Date
Sets the system date
Available when [Auto Synchronization] is set to [Off].
Time
Sets the system time
Available when [Auto Synchronization] is set to [Off].
A different menu will be displayed in the mode of Media Player. (p. 40 - 46)
Only available items can be selected.
To Next Page
Loading...
