K
Kimberly CarterSep 10, 2025
Why is my Panasonic WH-SDC0309K3E5 operation delayed a few minutes after restarting?
- JjoshuasparksSep 10, 2025
The delay after restarting your Panasonic Heat Pump is a protection mechanism for the compressor.
To Next PageTo Next PageWhy is my Panasonic WH-SDC0309K3E5 operation delayed a few minutes after restarting?
The delay after restarting your Panasonic Heat Pump is a protection mechanism for the compressor.
Overview of the Air-to-Water Heatpump system components and their arrangement.
Specifies the operational temperature ranges for heating and cooling modes.
Explains the remote controller's buttons and their functions.
Details the various display modes, operation icons, and temperature zone indicators.
Guide on how to select the operating language during the initial setup.
Instructions for setting the date, time, and clock format.
Steps to display the quick menu from the remote controller.
Lists and briefly describes the available functions in the quick menu.
Instructions on how to activate or deactivate the Forced DHW function.
Guide on using the Powerful mode for enhanced heating/cooling.
How to select and use the Quiet mode at different levels.
Steps to edit and set custom quiet operation timer patterns.
Instructions on how to manually force the heater to turn on.
Guide to setting up, copying, or deleting weekly operation schedules.
Procedure to restore system settings after an error occurs.
How to lock and unlock the remote controller.
How to display and navigate the main menu options.
Overview of the function setup menu for user settings.
Choosing between sound or capacity priority for quiet mode.
Setting the auto sterilization function ON or OFF.
Viewing present or historical energy consumption, generation, or COP.
Displaying detailed system information for each area.
Accessing and reviewing past error codes and history.
Setting the contrast level for the LCD display.
Adjusting backlight duration and intensity for the display.
Changing the display language for the remote controller interface.
Setting or managing a 4-digit password for system settings.
Storing contact details for installer or service personnel.
Connecting an external PCB for additional functions.
Configuring the system for 1 or 2 zones and selecting sensors.
Activating or deactivating water freeze prevention when the system is off.
Connecting the buffer tank and setting the temperature difference (ΔT).
Enabling or disabling the optional base pan heater and selecting its type.
Enabling or disabling bivalent connection for additional heat sources.
Selecting control patterns (Alternative, Parallel, Advanced) for bivalent operation.
Setting thresholds for starting and stopping the bivalent heat source.
Setting up SG ready input for bivalent system based on signal conditions.
Setting up to 10 different electricity prices for cost optimization.
Setting the boiler price and its efficiency for cost calculation.
Defining up to four seasons (Winter, Spring, Summer, Autumn) and their start months.
Setting start times and electricity prices for up to four patterns per season.
Configuring the solar connection and setting temperature parameters.
Configuring the SG Ready function for energy management.
Choosing between water or glycol for the circulation system.
Enabling or disabling the Heat-Cool mode.
Selecting between faster temperature achievement or energy saving.
Setting up the heat-cool meter for energy generation measurement.
Setting up meter for solar system energy generation.
Configuring various water and ambient temperatures for heating.
Setting the outdoor temperature to turn off heating.
Setting the temperature difference for turning heating ON.
Setting water temperatures for cooling ON using compensation curve or direct input.
Setting outdoor temps for switching between Heat and Cool modes.
Setting the maximum time for heating the tank.
Setting days and times for tank sterilization.
Setting the maximum speed for the pump.
Using the system to dry concrete during construction.
Setting up contact names and numbers for service.
Configuring single or dual remote controller usage.
Recommends cleaning the water filter annually to prevent clogging.
How to check and ensure water pressure is within the specified range.
Procedure for checking the functionality of the safety relief valve.
Conditions requiring immediate consultation with an authorized dealer.
Tasks for authorized dealers, including inspections and checks.
Lists common operational symptoms and their potential causes.
Steps to check before calling for service to diagnose issues.
List of error numbers and their explanations for system issues.
Notes on operating the system via a network adaptor and smart application.
General