Panasonic WR-DA7 - Page 5

WR-ADDA (A-D/D-A Card (8 in / 8 out))
Input 1 - 8 (balanced)
Indicated impedance : 10kΩ
Nominal source impedance : 50Ω ~ 600Ω
Nominal input level : +4dB (1.23V)
Maximum input level before clipping : +18dB (6.15V)
Connector type : D-sub 25P
Output 1 - 8 (balanced)
Indicated impedance : 10kΩ
Nominal source impedance : 150Ω
Nominal input level : +4dB (1.23V)
Maximum input level before clipping : +18dB (6.15V)
Connector type : D-sub 25P
WR-SMPT (SMPTE/V SYNC Card)
SMPTE IN
In/Out : In
Format : SMPTE (LTC)
Signal type : nominal -10dBV / 10kΩ
Connector : XLR
V SYNC
In/Out : In
Format : NTSC (B/W or color) / PAL
Signal type : 75Ω , termination
Connector : BNC
WR-TNDM (TANDEM Card (for running two DA7 mixers simultaneously))
Type : TANDEM connection
In/Out : In and Out
Format : RAMSA SSA
Signal type : RS422
Connector : D-sub 25P