Need help?Do you have a question about the Panasonic WV-BM80 and is the answer not in the manual?
Power| power supply | 120V AC 60 Hz |
|---|---|
| power consumption | 45W |
| power supply for camera | Regulated Current multiplex method (BNC) |
Camera and Video| camera input | 1.0Vp-p/75 ohms, Composite x 3 (BNC) |
|---|---|
| video input | 1.0Vp-p/75 ohms, composite x 1 (BNC) |
| video output | 1.0Vp-p/75 ohms, composite x 1 (BNC) |
Display| resolution | 750 lines at center |
|---|---|
| sweep linearity vertical | Less than 74 |
| sweep linearity horizontal | Less than 5% |
Weight and Dimensions| dimensions | 230(W) x 240(H) x 264(D) mm |
|---|---|
| weight | 3.8 kg |
| dimensions (inches) | 9"(W) x 9-7/16'(H) x 10-3/8"(D) |
Push button to turn the monitor and cameras on or off.
Selects monitor condition between external video input and camera input.
Selects between BYPASS, AUTO, and SPOT operating modes.
Manually adjusts sequential switching interval from 1 to 30 seconds.
Locks the monitor picture vertically.
Adjusts picture brightness by turning clockwise.
Adjusts picture contrast by turning clockwise.
External input for VTR playback or other video sources.
Outputs video signals to other monitors or VTRs.
Connects Mini CCTV Camera WV-80, supplying power and receiving video.
Connects the monitor to a power source.
To Next Page