Panasonic WV-CP414

PRECAUTIONS
1. Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws
or cover.
There are no user-serviceable parts inside.
Refer servicing to qualified service personnel.
. Handle the camera with care.
Do not abuse the camera. Avoid striking or shak-
ing it.
The camera could be damaged by improper han-
dling or storage.
. Do not expose the camera to rain or moisture,
or try to not operate it in wet areas.
Do take immediate action if ever the camera does
become wet. Turn the power off and refer servic-
ing to qualified service personnel. Moisture can
damage the camera and can also create the dan-
ger of electric shock.
. Never face the camera towards the sun.
Whether the camera is in use or not, never face it
towards the sun. Do use caution when operating
the camera in the vicinity of spot lights or other
bright lights and light reflecting objects.
. Do not operate the camera beyond its
temperature, humidity or power source ratings.
Do not use the camera in an extreme environment
where high temperature or high humidity exist.
Use the camera under conditions where the tem-
perature is within -10°C - +50°C, and the humidity
is below 90%. The input power source is 220 -
240V AC 50 Hz for WV-CP410, 12V DC for WV-
CP412 or 24V AC 50 Hz for WV-CP414.