Panasonic WV-CP460

1. Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or covers.
There are no user serviceable parts inside. Ask a qualified service person for servicing.
2. Handle the camera with care.
Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged
by improper handling or storage.
3. Do not expose the camera to rain or moisture, or try to operate it in wet areas.
Turn the power off immediately and ask a qualified service person for servicing.
Moisture can damage the camera and also create the danger of electric shock.
4. Do not use strong or abrasive detergents when cleaning the camera body.
Use a dry cloth to clean the camera when dirty.
In case the dirt is hard to remove, use a mild detergent and wipe gently.
5. Clean the CCD faceplate with care.
Do not clean the CCD with strong or abrasive detergents. Use lens tissue or a cotton
tipped applicator and ethanol.
6. Never face the camera towards the sun.
Do not aim the camera at bright objects. Whether the camera is in use or not, never
aim it at the sun or other extremely bright objects. Otherwise, blooming or smear may
be caused.
7. Do not operate the camera beyond the specified temperature, humidity or power
source ratings.
Use the camera under conditions where temperature is between –10°C - +50°C (14°F -
122°F), and humidity is below 90%. The input power source is 120 V AC 60 Hz for WV-
CP460 and DC 12 V/AC 24 V for WV-CP464.
PRECAUTIONS
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
The exclamation point within
an equilateral triangle is intend-
ed to alert the user to the pres-
ence of important operating
and maintenance (servicing)
instructions in the literature
accompanying the appliance.
The lightning flash with arrow-
head symbol, within an equilat-
eral triangle, is interned to alert
the user to the presence of
uninsulated "dangerous volt-
age" within the product's enclo-
sure that may be of sufficient
magnitude to constitute a risk
of electric shock to persons.
The serial number of this product may be found
on the top of the unit.
You should note the serial number of this unit
in the space provided and retain this instruction
as a permanent record of your purchase to aid
identification in the event of theft.
Model No.
Serial No.
SA 1966
SA 1965
N0100-1020 YWV8QA5377BN Printed in Japan
N 19
Panasonic's WV-CP460 (WV-CP464) series color digital camera introduces a new level of
high picture quality and high resolution through the use of a 1/3-inch interline transfer CCD
image sensor having 771 horizontal pixels (picture elements), and digital signal processing
LSIs. This model offers cutting-edge technology for advanced video surveillance.
PREFACE
Caution:
To prevent fire or electric shock hazard, use a UL listed cable (VW-1, style 1007) for
the DC 12 V or AC 24 V Input Terminal.
Model No. WV-CP460
WV-CP464
Color CCTV Cameras
Operating Instructions
CP460
(Lens Option)
WARNING:
To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER SER-
VICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
NOTE: This equipment has been tested and
found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful interfer-
ence when the equipment is operated in a
commercial environment. This equipment gen-
erates, uses, and can radiate radio frequency
energy and, if not installed and used in accor-
dance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential
area is likely to cause harmful interference in
which case the user will be required to correct
the interference at his own expense.
FCC Caution: To assure continued compli-
ance, (example - use only shielded interface
cables when connecting to computer or
peripheral devices). Any changes or modifica-
tions not expressly approved by the party
responsible for compliance could void the
user’s authority to operate this equipment.
For U.S.A

Panasonic WV-CP460 Specifications

Summary

Precautions and Safety Warnings

General Safety and Handling

Instructions on camera disassembly, handling, exposure to elements, and cleaning.

Operational Limits and Warnings

Guidelines on avoiding sun exposure and operating within specified temperature/humidity.

Features and Controls Overview

Key Camera Features

Overview of built-in functions like ALC/ELC, SUPER-D2, and sync capabilities.

Major Operating Controls

Identification of external controls, connectors, and mounting points.

Connections and Power Supply Details

Power Connections for WV-CP460 and WV-CP464

Instructions for connecting AC power to WV-CP460 and DC/AC power to WV-CP464.

24 V AC Power Supply and Video Cables

Details on wire gauge, cable length for 24V AC, and video cable recommendations.

Lens and Camera Installation

Auto Iris Lens Connector and Mounting

Procedure for installing lens connectors and mounting lenses onto the camera.

Focus and Flange-back Adjustment

Steps for adjusting focus and flange-back for optimal picture clarity.

Camera Mounting Procedures

Instructions for mounting the camera onto a bracket or surface.

Camera Setup Menu Navigation

Accessing and Opening the Setup Menu

How to initiate and display the on-screen Camera Setup Menu.

Setup Menu Operation and Reset

Using buttons to navigate, edit settings, and reset to factory defaults.

Setting Procedures: Identification and Light Control

Camera Identification (CAMERA ID) Setting

Assigning a name to the camera and customizing its display.

Light Control (ALCELC) and SUPER-D2

Configuring light control modes and the SUPER-D2 function for backlight compensation.

Setting Procedures: Shutter, Gain, Sensitivity, Sync

Shutter Speed and Gain Control Settings

Adjusting electronic shutter speed and automatic or fixed gain control.

Electronic Sensitivity Enhancement (SENS UP)

Enhancing camera sensitivity with AUTO or FIX modes.

Synchronization Settings (SYNC)

Selecting synchronization modes: Internal, Line-lock, VBS, or VS.

Synchronization Mode Details

VBS Gen-lock Mode Operation

Configuring VBS gen-lock, including horizontal and chroma phase adjustments.

VS Gen-lock Mode Operation

Configuring VS gen-lock, focusing on horizontal phase adjustments.

Sync and White Balance Configuration

Line-lock Sync Mode and Phase Adjustment

Setting up line-lock sync and adjusting vertical phase.

White Balance Modes and Adjustment

Using ATW and AWC modes for automatic white balance, plus manual fine-tuning.

Advanced Settings and Special Functions

Motion Detector and Lens Drive Settings

Configuring motion detection, alarm functions, and lens drive signals.

Special Menu Picture Adjustments

Adjusting picture orientation, chroma, aperture, pedestal, and hue.

Specifications and Accessories

Technical Specifications

Detailed technical data including resolution, sensitivity, power, and dimensions.

Standard and Optional Accessories

Listing of included accessories and available optional items.