Need help?Do you have a question about the PANCONTROL PAN Minimeter and is the answer not in the manual?
General| DC Current Ranges | 200µA, 2mA, 20mA, 200mA, 10A |
|---|---|
| Diode Test | Yes |
| Continuity Test | Yes |
| Power Supply | 9V battery |
| Dimensions | 126 x 70 x 24 mm |
| DC Voltage Ranges | 200mV, 2V, 20V, 200V |
| AC Voltage Ranges | 200V |
| Resistance Ranges | 200Ω, 2kΩ, 20kΩ, 200kΩ, 2MΩ |
| Display | LCD, 3.5 digits |
Illuminates the measuring point in low light conditions. Turns on/off by pressing button (3).
Turns the display backlight on or off by pressing button (3) for two seconds.
Freezes the display reading by pressing the HOLD button (3). HOLD symbol indicates function.
The device automatically switches off after 10 minutes of inactivity to save power.
Set rotary switch to V~ or V=, touch probe tips to measuring points, read stabilized value.
Replace battery when symbol or BATT is displayed. Open device, replace battery with correct polarity, close device.
To Next Page