Panda Wireless User’s Manual
Page 11
d. In the Available Networks window that appears, select the name
of the network to which you are connecting. Then click the connect
icon and wait several seconds while the Utility sets up a
connection.
e. The Ralink Utility automatically detects and displays the
security settings of the network to which you are connecting in the
Profile Setting screens. If the Utility shows that WPA-PSK or
WPA2-PSK security is detected as shown Below , click the right
arrow to save your settings.
f. In the screen that displays, in the ‘WPA Pre shared Key’
field ,type a security key, the same as that used by the AP or
wireless router to which you are connecting. Click the right arrow to
save your settings and connect to the network.
To Next Page
