EasyManuals Logo

Pandora EYE User Manual

Default Icon
11 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
AUTONOMOUS TRACKER PANDORA EYE USER MANUAL
12 13
section). Make a Bluetooth connection with the tracker via the
mobile application PANDORA NAV BT. Enter your phone number
in the following format +xxхххххххххх in the «Notication
number 1» eld in the «Settings» – «Phone» menu. Disconnect the
Bluetooth connection after the settings are complete.
A conrmation of the owners number setting will be an SMS
notication with the tracker current coordinates.
PANDORA NAV BT MOBILE APPLICATION
ANDROID
Pandora NAV BT application is a tool for setting up, updating and
monitoring the state of the tracker. The connection between the
application and the tracker is established only with the mobile
device that was previously added to the system memory via a
special coded Bluetooth Low Energy protocol.
You can download free Pandora NAV BT application for your
mobile device in the application store (Google Play).
Recording a mobile device in the tracker memory:
After installing the application, record a mobile device in the
tracker memory via Bluetooth connection:
1. Run PANDORA NAV BT application.
2. Press and hold the VALET button for 3 seconds (3 ashes of
the LED), release the button after the third ash – the tracker will
activate the Bluetooth connection.
3. Select the found device in the «Search» menu of the
application, enter the pairing PIN-code 0-0-0-0-0-0, the devices
will be paired after conrming the PIN-code entry.
Using the application:
Being in the Bluetooth radio coverage zone, Press and hold
the VALET button for 3 seconds (3 ashes of the LED), run the
PANDORA NAV BT application. The application will automatically
detect the system and make a connection. The main menu will be
opened after making the connection.
FIRMWARE UPDATE
In order to update the tracker rmware, press and hold the
VALET button form more than 10 seconds until smooth icker
appears. Run the PANDORA NAV BT, go to «Search device» and
select the found device.
You can select one of the update options:
WARNING! TO USE THE MOBILE APPLICATION WITH THE
TRACKER, YOUR DEVICE SHOUD HAVE ANDROID 4.4 OR
HIGER AND BLUETOOTH 4.0 MODULE.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pandora EYE and is the answer not in the manual?

Pandora EYE Specifications

General IconGeneral
TypeGPS tracker
SIM card slots1
Update Rate1Hz
ConnectivityGSM
FrequencyL1
Accuracy2.5m

Related product manuals