SGD 43-A
4.3” PanelPilotACE Compatible Display
* For measurement ranges up to ±10V.
** Hardware capability, but not available in soware at launch
Display 4.3” TFT with 262k colours
Touchscreen Capacive
Resoluon 480 x 272px
Processor Freescale i.MX283 (454MHz, 32bit, ARM 9)
Analogue Inputs 4 x ±40V or 4-20mA (16bit ADC with 0.05% ±1mV typical accuracy*)
Serial Buses RS232**, SPI**, I2C**, RS485**, Ethernet**
Memory 1Gbit DDR2 SDRAM and 2GB SD card
Operang Temperature 0 to 40°C (32 to 104°F)
Supply 5 to 30V d.c. (300mA typical at 5V d.c.)
Outside Dimensions 119.3 (4.7) x 79.8 (3.1) x 20.0 (0.8) mm (in)
Specications
Issue 2 09/2014 B.S. Page 1 of 10
www.panelpilot.com
The SGD 43-A is the rst in a range of PanelPilotACE compable displays and panel meters. The low-prole display
features a 4.3” capacive touch screen and an ARM Cortex A9 processor running embedded Linux. The display can be
powered from either USB or a 5 to 30V d.c. supply and oers users a wealth of hardware interfaces which include four
16bit bi-polar analogue inputs (to a maximum of ±40V d.c.), eight digital input/output pins, two alarm outputs (maximum
current sink 10mA) and four 8bit PWM outputs.
Users program the display using the free PanelPilotACE Design Studio soware which allows the creaon of anything from
simple meters and dials, through to advanced user interfaces with control elements.
SGD 43-A is a 4.3” capacitive touch display designed for use with
PanelPilotACE Design Studio, a free drag-and-drop style software package
for rapid development of advanced user
interfaces and panel meters.
To Next Page
Need help?
General