Panlab Rotarod LE8205 User Manual

References:
LE8205 (76-0770), LE8305 (76-0771), LE8505 (76-0772), LE8355 (76-0773)
Version:
V20/02/2015
Hardware User’s Manual
Rotarod
Panlab, s.l.u
C/Energía, 112
08940 Cornellà de Ll.(Barcelona)
Spain
www.panlab.com
International Calls: +34 934 750 697
Domestic Call: 934 190 709
Fax: +34 934 750 699
Info@panlab.com

Panlab Rotarod LE8205 Specifications

General

Brand	Panlab
Model	Rotarod LE8205
Category	Laboratory Equipment
Language	English

Summary

Good Laboratory Practice

Decontamination Prior to Equipment Disposal

Procedures for cleaning equipment before disposal according to safety laws.

Unpacking and Equipment Installation

PC Control and Safety

PC Operation Safety Precautions

General safety precautions for operating the device with a PC.

Class A Equipment Compliance

Information on compliance for Class A digital devices.

Maintenance Procedures

Key Pressing and Cleaning

Guidance on key presses and recommended cleaning methods.

Liquid Handling Warning

Warning against pouring liquids onto the equipment.

Post-Use Equipment Handling

Steps to take after finishing equipment use.

Introduction to ROTAROD

Product Overview and Application

Description of ROTAROD units and their use in testing motor activity.

Rod Mechanism Description

Details on the rotating rod, speed, and acceleration.

PC Connectivity and Data Transfer

Sedacom Software Requirement

Need for Sedacom software for data transfer.

ROTAROD Model Variations

Explains differences between various ROTAROD models.

Front Panel Description

Front Panel Controls

Function of Start/Stop, Mode, Hold Ramp, and Settings buttons.

Front Panel Displays

Explanation of speed indicators and lane counters.

Rear Panel Description

Rear Panel Ports and Switch

Identification of USB, Power, and Power Switch.

ROTAROD Unit Components

Main Unit Parts Identification

Identification of key components of the Rotarod.

Model-Specific Features and Lever Function

Details on slot counts, accessories, and lever operation.

Equipment Connection Procedure

Connection Diagram and Cable List

Visual guide and table for connecting the equipment.

Working with the ROTAROD

Start-up and Settings Menu

Initial screen display and access to settings options.

Display and Motor Direction Settings

Adjusting display backlight and motor rolling direction.

Selection of the Working Mode

Constant Mode Operation

Using the Rotarod at a constant speed.

Setting Speed in Constant Mode

How to set the rod speed before or during use.

Acceleration Mode Operation

Using the Rotarod with accelerating speed.

Acceleration Parameters and Waiting State

Setting acceleration time and the initial waiting state.

Acceleration Mode Running State

Motor speed ramp and timer function during acceleration.

Acceleration-Constant Mode

Running at a constant speed after acceleration.

Timer Function in Acceleration-Constant

How timers stop when levers are lowered.

Instrument Preparation for Use

Placing Animals on the Rod

Technique for placing animals on the rotating rod.

Pre-Experiment Familiarization

Advisories for starting the rod and animal familiarization.

Conducting Experiments

Constant Mode Experiment Steps

Step-by-step guide for experiments in constant speed mode.

Setting Rod Speed

How to set the desired rod speed using the interface.

Acceleration Mode Experiment Steps

Step-by-step guide for experiments in acceleration mode.

Setting Ramp Time

How to set the acceleration ramp time.

Acceleration Mode Lever Activation

Display messages for lever activation in acceleration mode.

Acceleration Mode Running

How lane counters start timing and ramp accelerates.

Acceleration-Constant Mode Steps

Guide for experiments in acceleration-constant mode.

Interrupting and Stopping Experiments

How to stop or interrupt an ongoing experiment.

Data Transfer to PC via Sedacom

Sedacom Software Installation and Use

Instructions for installing and using Sedacom software.

USB Communication Cable Requirement

Requirement and use of the USB cable for data transfer.

Routine Maintenance

Removing and Reattaching Parts

Procedures for disassembling and reassembling unit parts.

USB Cable Care and Replacement

Guidance on USB cable maintenance and replacement.

Unit Cleaning Procedures and Warnings

Warnings and methods for cleaning the equipment.

Lever Sensitivity Adjustment

How to adjust lever sensitivity for fall detection.

Troubleshooting Common Issues

"Place All Levers Down" Message Resolution

Solutions for the "Place all levers down" error.

Rod Rotation Troubleshooting

Troubleshooting steps for a non-rotating rod.

"Raise Levers to Activate Lanes" Message Resolution

Solutions for the "Raise levers to activate lanes" error.

Preventive Maintenance Schedule

Recommended Maintenance Tasks

Table of recommended maintenance tasks and frequency.

Technical Specifications

General and Environmental Specifications

Details on power, environment, and communications.

Performance Specifications

Range, resolution, and slope for speed and acceleration.

Physical Dimensions and Weight

Physical specifications for different ROTAROD models.

Declaration of Conformity

Manufacturer, Product, and EU Directives

Details on manufacturer, product models, and EU directives.

Harmonized Standards Compliance

List of standards applied for product evaluation.

Environmental Protection Guidelines

WEEE Directive Information (English)

Information on Waste Electrical and Electronic Equipment Directive.