Need help?Do you have a question about the Pansat 250SM and is the answer not in the manual?
General| FTA | Yes |
|---|---|
| Supported Formats | MPEG-2, MPEG-4 |
| Input Frequency | 950 - 2150 MHz |
| LNB Power | 13/18V |
| DiSEqC | 1.0, 1.1, 1.2 |
| RS-232 Port | Yes |
| Category | FTA |
| Tuner Type | Digital |
| Input | Satellite |
| Features | Blind Scan |
| Symbol Rate | 1-45 MS/s |
| Video Output | Composite |
| Audio Output | Stereo |
| Power Supply | 110-240V AC |
| Output | RCA |
Key safety warnings and cautions for electrical shock, fire, and environmental hazards.
Guidelines for safe operation, maintenance, cleaning, and product placement.
Initial steps for powering on, selecting language, and basic setup procedures.
Guide to installing the receiver, configuring LNB, and scanning for channels.
Instructions for sorting, moving, deleting, skipping, and renaming channels.
Resolving problems with the front panel LED, picture, sound, and signal reception.
Troubleshooting for remote controller malfunctions and distorted menu screens.
To Next Page
