PANTONE Color Cue Top View
To turn On the PANTONE Color Cue, press and hold the Power
ON/OFF button. If there are no characters on the display, install or
replace the battery.
To select a Color
Place the PANTONE Color Cue down on a sample and press the clear View
and Measure button, which is also a switch.
Quick Start Guide
Optional Trim
Fold Fold Fold
3Optional Trim Fold Fold .Fold
Power
Menu
Next Display
View
Light
button
View and
Measure
button
PANTONE Color Cue Bottom View
Sample
Port
PANTONE 185 C
PANTONE Wm Red
75.00%
PANTONE RubRed
25.00%
CMYK
0 91 76 0
CMYKOG
0 100 0 0 76 0
sRGB100
90 5 18
sRGB255
230 13 46
HTML
E60D2E
Press the View and Measure
button and a PANTONE
Number for that specific color
will appear in the display.
The Next key may be used to step the
display through additional information.
The items available for display are
determined by each deck type and
selected by Menu operations.
After the last item, the PANTONE
Number will appear. If you go past the
item you wish to see, just keep going
until it reappears.
Menu Operations
The Menu button is used to select menu options. On the first press, the
display will show *Measure and the currently selected deck. Pressing
Menu again will step the display.
“ * ” marks the selected menu item.
Library Selection
Pressing the View and Measure button changes or starts the selected
menu item. The following sequence selects the deck type.
When the desired library is selected, press the Next button and it will
return to the top of the menu. Press the View and Measure button on
top of a new sample to get a PANTONE Number for that specific color
using the new selection, i.e., C, M and U for coated, matte and uncoated,
respectively.
If the sample is small
and alignment is difficult,
look through the measure
window to align the
sample. The View Light
Button may be used
to provide additional
(green) light
*Measure
PANTONE coated
*PANTONE coated
*Color Lookup
*Color Lookup
Display Data
*Calibrate
Special Options
*Special Options
Measure
*PANTONE coated
Color Lookup
*PANTONE matte
Color Lookup
*PANTONE uncoated
Color Lookup
Lab
50.23 76.22 42.05
PANTONE 185 C
*Display Data
Calibrate
*Measure
PANTONE coated
Euro CMYK
0 95 64 0
To Next Page
Need help?
General