16
2.3.3. Installing optional tray
• For the installation of optional trays, please refer to “Installing optional tray” or the
Installation Guide supplied with the optional trays.
• Before you use it, please remove the A5/A6 stopper before loading paper.
1. Pull out the optional tray completely from the printer.
2. Slide the paper length guide and paper width guide to the slot suitable for paper size, to match
paper length and width.
• Do not overly squeeze the “paper length guide” and “paper width guide”, otherwise it
could easily lead to deformation of paper.
• To load Legal size paper, press inwards the Release button at the rear end of the tray
and pull out the rear end of the tray to lengthen the tray.
To Next Page
Loading...
