Pantum CM1100ADN - In Manuellen Karton Legen

17
2.4.2. In manuellen Karton legen
1. Adjust the guide to match the size of the loaded paper.
2. Load a sheet of paper with the printable side facing up.
Note:
• For single-sided printing, load the paper with the printable side facing up and the
top edge going into the printer first.
• For better printing effect, it is recommended to use new, undamaged paper.
3. Feed the paper until its front edge is pulled in.
Note:
• To avoid paper jams, do not force paper into the manual tray.