64
7.1.4. Sleep Time Setting
Set the Sleep Mode to lower the power consumption. Sleep Time Setting allows you to select the
idle time before the device enter into Sleep Mode. The default idle time is 1 minute.
1) Press "Menu" button to enter the menu interface.
2) Press direction pad "▲" or "▼" to select "System Setting" and press OK button.
3) Press direction key "▲" or "▼" to select "Sleep time set" option, and press "OK" key to set the
corresponding sleep time.
• When the printer is in dormant status, you can wake it up just by pressing Power
Saving button, sending print/scan/Fax task, or opening or closing the output bin.
To Next Page
Loading...
Need help?
General