Pantum M6500 series Faq

36. Why the printer could not feed paper successfully?
There are three possible reasons as below:
1) There is too much paper in the tray:
Solution: Remove excess paper from the tray.
2) The print media is loaded incorrectly:
Solution: Please correctly load the print media.
3) The print media is beyond the usage specification range.
Solution: Please use the print media within the specification range.
37. Why it will be smoked when printing?
The smoking is water vapor, which is caused by the printing environment and paper
status. When we do the printing, the fuser unit will heat the paper to around 180 °C, so

Pantum M6500 series Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Processor Speed	600 MHz
Memory	128 MB
Input Capacity	150 sheets
Output Capacity	100 sheets
Functions	Print
Supported Operating Systems	Windows, Mac OS, Linux
Print Speed	22 ppm (A4)
First Print Out Time	Less than 7.8 seconds
Recommended Monthly Volume	2, 000 pages
Connectivity	USB 2.0
Supported Media Sizes	A4, A5, A6, B5, Postcard
Media Types	Plain, Thick, Thin, Label, Cardstock, Envelope