12.1.6.Auto shut-off setting
1) Press "Menu" to enter the Menu Settings interface.
2) Press "OK" to select the "System Setting" option.
3)
Press direction key “▲” or “▼” to select options of “Auto off set”, press “OK” to set of
condition and off delay.
Note: Set auto off condition:
• Shutdown under no-port state (default configuration): no port is connected,
Wi-Fi function deactivated,printer is under standby or sleep mode.
• Shutdown under idle state: the printer is under standby or sleep mode.
• If auto off condition is satisfied, printer will be off at the preset time.
• After printer is off, power consumption is 0.5W or lower.
• Individual countries (or regions) do not support auto off setting.
“Auto shut-off setting” to set off condition and off delay of printer.
To Next Page
Loading...
Need help?
General