Pantum M7200 Series

3. How to setting the Fax sending report on M6800/M7200 Series Printer?
Other Tips: at step4, we can select “NO.1 Turn off” , “NO. 2 Always print” , “NO. 3 Only err ocur”
option through “page up/down” button for other report request. The interface as below:
Step1: Press “Menu” Button on the control
panel, as the arrow indicated.
Step2: Press “page down” Button to
select “1.Fax setting” , then press ”OK”.
Step3: Select “2.Confirm report” by “page
down” button, then press “OK”.
Step4: Select “2.Confirm report” by “page down”
button, then press “OK”. The setting is done.