Pantum P3500 Series - Page 60

4-22
4) Select the "1.Wired Info" option and press "OK"; Press direction key "▲" or "▼" to select
"1.IP Address", "2.Subnet mask", or "3.Gateway".
5) Select the "2.Wireless Info" option and press "OK"; Press direction key "▲" or "▼" to select
"1 .Connect state", "2.IP Address", "3.Subnet mask", "4.Gateway", "5.Channel", or "6.SSID".
6) Select the "3.WiFi Dir Info" option and press "OK"; Press direction key "▲" or "▼" to
select "1.Status", "2.Device name", "3.IP Address", "4.Password", "5.Channel", or "6.Conn
device #".