Pantum P3500 Series - Tray Settings through Control Panel

7-4
7.2.2. Tray Settings through Control Panel
Note: • Users can perform the paper size settings on the control panel for the standard
tray, the multipurpose tray and the optional tray. Here we take the standard input
tray as an example.
1) Press "Menu" to enter the Menu Settings interface.
2) Press direction key "▲" or "▼" to select the "2.Tray Setup" option and press "OK".
2.Tray Setup
3) Press direction key "▲" or "▼" to select the "2.Standard Tray" option and press "OK".
4) Press direction key "▲" or "▼" to select the "2.Paper size" option to make the settings.