EasyManua.ls Logo

Paradigm Reference OM-570 - User Manual

Default Icon
20 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OWNERS MANUAL OM-570
Paradigm Electronics Inc. In Canada: 205 Annagem Blvd., Mississauga, ON L5T 2V1 In the U.S.: MPO Box 2410, Niagara Falls, NY 14302
STUDIO AND SIGNATURE SERIES:
FRONT AND CENTER-CHANNEL SPEAKERS
Thank you for choosing Paradigm
®
Reference speakers and congratulations!
You are about to experience the stunning difference that these state-of-the-art
high-end speakers will make in your music and home theater system.
Comprehensive R&D, leading-edge design, use of the finest materials
, and
sophisticated manufacturing and quality control techniques provide vastly superior
performance for each component part and at every stage of design.
Paradigm
®
Reference speakers will provide you with stunning high-end sound
and unparalleled listening pleasure for many years to come.
To achieve all of the exceptional sound that these speakers are capable of
providing requires care in installation and operation. Please take the time to read
this manual and follow all instructions. If you have further questions, contact your
Authorized Paradigm
®
Reference Dealer or visit the Q&A page in the Tech
Support section of our website at www.paradigm.com.

Table of Contents

Questions and Answers

  • D
    Darren WhiteAug 11, 2025
    What to do if there is no sound from one or more Paradigm Reference Speakers?
    • V
      Valerie JamesAug 11, 2025
      If you're not getting sound from some of your Paradigm Reference Speakers, verify the balance control or VC-150 Volume Control (if it is used). Ensure all power cords are correctly plugged in and working. To identify the source of the issue, try swapping a speaker that isn't working with one that is. This will help determine if the problem lies with the speaker itself, the wiring, or the amplifier.
  • R
    rhudsonAug 22, 2025
    Why is there a lack of bass or dislocated image in my Paradigm Reference Speakers?
    • C
      Catherine ChristianAug 22, 2025
      A lack of bass or a dislocated image from your Paradigm Reference Speakers can occur if one or more speakers are connected out of phase, meaning their polarity is reversed. To fix it, double-check that each speaker cable is connected with the correct polarity: red (+) to red (+) and black (-) to black (-).
  • L
    lucasmoralesAug 31, 2025
    How to fix Paradigm Reference Speakers with no sound?
    • K
      Kathleen KnappAug 31, 2025
      To address the issue of no sound from your Paradigm Reference Speakers: First, ensure that your receiver, preamp, or amplifier is properly plugged in and turned on. Check that the power outlet at the wall is functioning correctly. Also, verify whether headphones are plugged in or if the system is on Mute. Finally, re-check all connections to ensure they are secure.

Paradigm Reference OM-570 Specifications

General IconGeneral
TypeFloorstanding
Impedance8 ohms
Crossover2.5kHz
High Frequency Driver1-inch ferrofluid-cooled dome tweeter
Low Frequency Drivermineral-filled polypropylene cone
Woofermineral-filled polypropylene cone
Suitable Amplifier Power Range15-150 watts
FinishesBlack Ash
Frequency Response30 Hz - 20 kHz ± 2dB