Need help?Do you have a question about the Paradigm DEFIANCE V12 and is the answer not in the manual?
Provides essential safety precautions for operating the subwoofer.
Details compliance with Industry Canada regulations for radio frequency devices.
Outlines RF exposure compliance requirements for the equipment.
Key safety warnings and essential steps for quick subwoofer installation.
Guidance on unpacking, placement, signal, and power connection.
Instructions for setting controls using LFE and Left/Right inputs for V10/V12 and V8.
Information on subwoofer break-in, cleaning, and power requirements.
Explains how room acoustics affect bass performance and placement.
Illustrates how room placement affects bass output and suggests optimal areas.
Details the benefits of dual subwoofers and a procedure for placement.
Describes wired connection using LFE and Line Level inputs.
Instructions for connecting via Line Level inputs from Pre-Out/Front-Out.
Provides two options for connecting using speaker level inputs.
Presents the third option for connecting using speaker level inputs.
Guides connecting the wireless transmitter to the Preamp/Receiver using LFE output.
Details connecting the wireless transmitter using Pre-Out/Front-Out jacks.
Explains wireless operation, pairing, and transmitter functionality.
Steps for re-syncing the wireless transmitter and subwoofer if needed.
Details the Setting Control switch and Level knob functions.
Covers ARC input, status indicator, power modes, and speaker level inputs.
Explains Line Level, LFE, Wireless Module inputs, and AC power connection.
Details the Level adjustment and Low Pass Filter controls for the V8 model.
Covers Phase adjustment, status indicator, and power mode settings for the V8.
Details speaker level, line level, LFE inputs, and AC power connection for the V8.
Instructions for fine-tuning the V10/V12 using the Paradigm Subwoofer App.
Guidance for fine-tuning the V8 subwoofer with system audio settings.
Steps for setting subwoofer controls when crossover is managed by the Preamp/Receiver.
Procedure for setting subwoofer controls using the local crossover method.
Explains the easy setup method for ARC using an iOS device and app.
Details intermediate setup for ARC using mobile devices and microphone.
Outlines the professional setup for ARC using a PC and software.
Details the limited warranty, its limitations, and owner responsibilities.
To Next Page
General
