NETWORK REQUIREMENTS
Paradigm Premium Wireless Series Owner’s Manual
You must have the following to connect your Paradigm product
to your network:
• A high-speed DSL/Cable modem or a fiber-to-the-home broadband
connection for reliable playback of music services based on the
internet. Note: Satellite internet services are prone to playback
issues due to fluctuating download rates.
NOTE: If your wireless connectivity is weak or not
available, connect your Paradigm product to your router
with the supplied ethernet cable.
• If your modem is not a modem/router combination you must
purchase and install a router into your home network
before proceeding.
• If you plan to use the DTS Play-Fi® App on an Android™ or
iOS device or you are setting up a Paradigm product for Wi-Fi
streaming, you will need a wireless router.
• Have your network password ready before connecting
the Paradigm product to your network.
NOTE: To make the quickest connection, use a dual-band
router and connect your Paradigm Product to the 5G
network instead of the 2.4 Network.
TIP! Paradigm Premium Wireless Series products communicate
with wireless networks that support 802.11 g/n wireless
technology. For the fastest streaming performance, a network
that supports 802.11 n wireless technology is recommended. A
network supporting 802.11b may be used, but it will effectively
stream to only one device equipped with DTS Play-Fi®.
TIP! For superior performance connect your PC or NAS
(Network-Attached Storage) drive that holds your personal music
library to your network router using the provided Ethernet cable.
SYSTEM REQUIREMENTS
• An Android device running Android 2.2 or later. • A Windows® PC running Windows® 7, 8 or 8.1 (32 and 64 bit).
• An iOS device running iOS 6.0 or later.
To Next Page
Loading...