Need help?Do you have a question about the Paradox Hellas S.A. Matrix 2000 and is the answer not in the manual?
General| Brand | Paradox Hellas S.A. |
|---|---|
| Model | Matrix 2000 |
| Category | Repeater |
| Language | English |
Indicates normal system operation when voltage is on and batteries are connected.
Indicates general problems like zone connection issues or output faults.
Details blinking indications for zone faults or relay expansion output faults.
Indicates fire detection or operator-initiated evacuation.
Indicates specific zones that are activated or in alarm/evacuate state.
Stops buzzer in case of alarm or fault and sirens in case of alarm.
Turns on all luminous indications to confirm LED functionality.
Resets zones to Stand By mode after an alarm condition.
Isolates a zone to prevent false alarms during works or issues.
Used by installer to restart the microcontroller or apply dipswitch changes.
Defines the repeater's ID number (1-8) using internal micro switches.
Options for powering the repeater directly from the panel or via external supply.
To Next Page