Chime zones
Zones 1 to 6, as well as the local keypad zones, can be programmed
as chime zones. A chime zone "advises" you when it is opened by
creating a rapid intermittent beep tone. To turn on the "chime zone"
feature, press on the selected zone key for three seconds until the
intermittent chime beep is heard. This means that the chime feature
has been activated. If a continuous beep is heard, this means that
the chime is "off". (The keypad zone chime is enabled by pressing
key [8].)
If you have more than one keypad in your system, please "chime"
program each keypad separately. Keypad chimes must be repro-
grammed if the panel suffers total power loss.
CHIME KEYS:
Key [1]-[6] Turns chime "ON" or "OFF" in zones numbered 1-6.
Key [8] Turns the chime "ON" and "OFF" for the zone connected to
this keypad.
Each keypad must be programmed independently.
PANEL BUZZER MUTE:
Key [9] Turns keypad sounder "ON" and "OFF" (intermittent beep
means MUTE is activated, and keypad sounder is "OFF".
Depress for 2 seconds to disable.)
Trouble Display [TRBL]
AC power failure will be communicated to you by the illumination of
the keypad [TRBL] indicator. If you are unable to find the cause of AC
power loss, contact your installer/alarm company immediately.
IMPORTANT:
Keep this information in a secure location.
ZONE DESCRIPTION
24Hr Bypass Enabled
Zone 1:
ll
Zone 2:
ll
Zone 3:
ll
Zone 4:
ll
Zone 5:
ll
Zone 6:
ll
24Hr Fire
Zone 7:
ll
Zone 8:
11
10
UM727UM727
To Next Page
Loading...
