Programming
When connected to a SP Series or E55 system, the RX1 settings are
programmed in the control panel. Refer to the panel’s Programming Guide.The
following control panel programming sections apply to program wireless devices
(bold = default):
NOTE: Record the serial number of wireless modules to be used with the RX1.
Onboard PGMs
The RX1 includes two on-board PGMs which follow buttons 1 and 2 on REM1/
RAC1 remote controls. PGMs are also programmable and appear as PGMs 13
and 14 in the SP Series or E55 panel (V5.0 and higher). Refer to the panel’s
Programming Guide for instructions on PGM programming.
Section Description
[061] - [092] Wireless serial numbers
[101] - [132] Wireless transmitter signal strength
[610] - [642] Remote control button assignment
[651] - [682] Remote control user assignment
[705] Supervision Options
[6] [7]
RF Zone
Supervision Options
Keypad / Bus Module
Supervision Options
Off Off Disabled Disabled
Off On Trouble only Trouble only
On Off
Disarmed: trouble only
Armed: follow zone’s alarm type
Trouble only
On On
Disarmed: audible alarm
Armed: follow zone’s alarm type
Audible alarm
[706] General Zone Options
Option OFF ON
[1] Check-in supervision time N 24 hours N 80 minutes
Warranty
For complete warranty information, please visit www.paradox.com/terms. Your use of the Paradox
product signifies your acceptance of all warranty terms and conditions. Esprit E55 and SP Series
are trademarks or registered trademarks of Paradox Security Systems Ltd. or its affiliates in
Canada, the United States and/or other countries. For the latest product approvals, such as UL and
CE, please visit www.paradox.com. © 2009 Paradox Security Systems Ltd. All rights reserved.
Specifications may change without prior notice.
Patents
One or more of the following US patents may apply: 7046142, 6215399, 6111256, 6104319,
5920259, 5886632, 5721542, 5287111, 5119069, 5077549 and RE39406 and other pending
patents may apply. Canadian and international patents may also apply.
RX1-EI01 10/2009 Printed in Canada
PARADOX.COM
To Previous Page
Loading...
Need help?
General
