Need help?Do you have a question about the Paradox omnia OMN-RCV3 and is the answer not in the manual?
General| Model | OMN-RCV3 |
|---|---|
| Type | Receiver |
| Frequency Range | 433 MHz or 868 MHz |
| Current Consumption | 50 mA |
| Tamper Protection | Yes |
| Weight | 150 g |
| PGMs | 4 |
Details the technical specifications of the Omnia Wireless Receiver Module.
Lists the key features and capabilities of the Omnia Wireless Receiver Module.
Provides recommendations for the optimal placement of the receiver module.
Details how to connect and physically mount the receiver module.
Explains the procedure for entering the programming mode on the Spectra control panel.
Details the process of programming wireless transmitters (detectors and door contacts).
Guides users on how to check the signal strength of installed wireless transmitters.
Explains how to view the serial numbers of unknown Omnia wireless transmitters.
Refers to the Spectra Reference & Installation Manual for system reset procedures.
Explains the Check-in Supervision feature and how to enable it.
Details how to configure the timer settings for Check-in Supervision.
Describes the Low Battery Supervision feature for wireless transmitters.
Explains how to assign the receiver's tamper switch to a specific zone.
Explains how to activate the Programmable Outputs (PGMs) using remote controls.
Details how to set the deactivation mode for the Programmable Outputs (PGMs).
Explains how to assign remote controls to the receiver module using automatic learning.
Details how to assign programmed remote controls to specific user access codes.
Explains how to program the functions of the remote control buttons.
Provides instructions on how to delete previously assigned remote controls.
Guides users on how to replace the batteries in the remote control.
To Next Page
