Need help?Do you have a question about the Paragon S Series and is the answer not in the manual?
General| Category | Kilns |
|---|---|
| Brand | Paragon |
| Series | S Series |
| Interior Dimensions | Varies by model (e.g., S-111: 11.25" diameter x 9" deep) |
| Exterior Dimensions | Varies by model (e.g., S-111: 17" W x 20" D x 17" H) |
| Power Requirements | Varies by model |
| Warranty | 2 years |
Crucial safety guidelines for kiln operation, handling hot components, and user supervision.
Explains the Kiln Sitter's mechanism for automatic kiln shutoff using a pyrometric cone.
Details the Limit Timer's role as a backup shutoff and its setting.
Step-by-step guide for calibrating the Kiln Sitter's components for accurate operation.
Procedures to verify the correct mechanical operation of the Kiln Sitter after adjustments.
Steps for preparing and operating the Kiln Sitter for firings.
Guidance on choosing cones and proper kiln loading to ensure correct shutoff.
Troubleshooting problems like shutoff too soon or too late, and failure to shut off.
Explains infinite control switches and switch-timers in kiln operation.
Suggested firing schedules and cooling control for S-Series kilns.
Details on firing stages and recommended settings for various SnF kiln models.
How to modify switch settings to alter the firing speed of SnF kilns.
Diagnosing problems with kiln firing, elements, and temperature attainment.
Troubleshooting fuses, breakers, outlets, and switch failures.
Diagnosing issues with the Kiln Sitter not shutting off and timer malfunctions.
Addressing inconsistent results and cones breaking within the Kiln Sitter.
Regular upkeep procedures for the Kiln Sitter, including cleaning.
Instructions for replacing the Kiln Sitter's porcelain tube assembly.
Steps for cleaning or replacing the electrical contacts behind the Kiln Sitter plunger.
Guide for replacing faulty infinite control switches or switch-timers.
To Next Page
