paramondo CURVE - Page 45

www.paramondo.de
45
Anschluss und Inbetriebnahme • Connecon and start-up • Aansluing en inbedrijfstelling • Conexión y puesta en servicio • Connexion et
mise en service • Collegamento e messa in funzione • Podłączenie i uruchomienie • Elektrik bağlansının yapılması ve işleme alınması
You can addionally mount to your awning other Jaroli® hand and wall transmiers. You can program them by means of the copy funcon
as follows:
Copying the radio code
1. Press simultaneously the UP and DOWN buon on the already
programmed transmier. Press then 8 mes the STOP buon on this
transmier. The motor will vibrate for conrmaon.
2. Press now within 5 seconds the buon UP and DOWN simulta-
neously and then briey the STOP buon on the new transmier
where you want to copy the code. The motor will vibrate for conr-
maon. The code will now be copied on the new transmier.
Deleng the radio code
1. Press simultaneously the UP and DOWN buon on the transmier.
Press then 6 mes the STOP buon.
2. Press then within 10 seconds the UP buon. The motor will conrm
the deleon of the code through a short vibraon
Changing the direcon of the rotaon
Press simultaneously the UP and DOWN buon on the transmier.
Press then the STOP buon 6 mes.
Press then within 10 seconds the UP buon. The motor will conrm
the deleon of the code through a short vibraon.
ATTENTION! When you change the direcon of the ro-
taon the transmier will be removed from the motor.
Please program it again as described above.
Simultaneously press
the Up / Down buon
(motor vibrates)
Then press 8 mes
the STOP buon
Transmier 1
1
8
Transmier 2
Simultaneously press
the Up / Down buon
Then press the Stop
buon
(motor vibrates)
1
1
Simultaneously
press the Up / Down
buon
Then press 6 mes
the Stop buon
(motor vibrates)
Press the Up
buon
1
6
1
Simultaneously press
the Up / Down buon
Then press 6 mes
the Stop buon
Press Up
buon
(motor vibrates)
1
6
1