paramondo CURVE - Page 8

8
www.paramondo.de
Sicherheitshinweise • safety instrucons • Informaons sur la sécurité • Información de seguridad • Indicazi-
oni generali di sicurezza • Veiligheidsinstruces • Ogólne zasady bezpieczeństwa • Genel Güvenlik Uyarıları
of sophiscated manufacture and processing technology.
Such phenomena do not diminish the value and the usability of the
awning. To prevent irritaon, we would like to expressly point out the
following properes, within the scope of consumer awareness:
Bending folds
They originate at the moment of the manu-
facture and when the sun protecon fabric is
folded. A dark line, which originates because
of the folding of the bre, may become visible
in back light parcularly in case of bright
colours (Light refracon). (Img. 1)
Waviness in the seam and length area
It can occur in the side seams, in the vicinity of the seams and in the
centre of the lengths. The cover is laid double on the seams. This
results in dierent rolling diameters.
The tension that arises due to the folding arms and the drooping of
the roller tube and/or the front prole may enhance these eects.
Waviness can originate if a water pocket forms during heavy rain.
(Img. 2,3)
Stretching of the side lengths
The cover is usually kept permanently taut by means of an acve
spring system. Seams and hems have a reinforcing eect but must
also undergo the most strain. When the cover is rolled up the hems
and seams lay on top of one another, this increases the pressure and
tension even more. Seams and hems are pressed at and increase in
length. When the awning is moved out this can lead to the side seams
hanging down slightly. (Img. 4)
Waterproofness/resistance to rain
Polyester fabric is coated with a water-resistant nish and remains
resistant to rain during a short, light shower of rain with good care
and a pitch angle of at least 14°. During longer periods and/or heavy
rainfall the awning must remain closed or rolled up in order to avoid
damage. Should the cover have become wet the awning must be ex-
tended for drying later, in order to avoid the formaon of mould stain.
Further informaon about the properes of awning covers as well
as the most important state-of-the-art cases of applicaon is to be
found in the guidelines for evaluaon of ready-made awning fabrics -
Publisher:
ITRS Industrieverband Technische Texlien - Rollladen-
Sonnenschutz e.V.
Baery regulaon – in compliance with § 12
sentence n.1-3 of the regulaon about the
collecon and disposal of used baeries and
accumulators of the 27th March 1998 (BGBl. I
S. 658) it is pointed out to the customer, that as
nal consumer, he is legally obligated to return
used baeries. Baeries or accumulators can
be returned free of charge aer use at the point
of sale, also with us, or in the immediate vicinity of the customer.
Baeries or accumulators which contain pollutants are marked with
the symbol of a crossed-out dustbin. Near the crossed-out dustbin
symbol there are the chemical names of the pollutants. „Cd“ stands
for cadmium, „Pb“ for lead, „Hg“ for mercury „Li“ for lithium, „Ni“ for
nickel, „Mh“ for metal hydride and „Zi“ for zinc.
As manufacturer in line with ElektroG we are registered with the com-
petent German registry Sung Elektro-Altgeräte Register, Benno-
Strauß-Str. 1, 90763 Fürth under the following registraon number:
WEEE-Reg.-Nr. DE 41060608 for: JAROLIFT ® ™
Img. 1 Img. 2 Img. 3
Img. 4
Michael Mayer
Director
The awning motor TDMK-B fulls the requirements of the European and national directives.
2006/42/EG – Machinery Directive
2014/53/EU – Radio Equipment Directive
2014/30/EU – EMC Directive
2014/35/EU – Low Voltage Directive
The above-mentioned products full the requirements of German Product Safety Law (ProdSG) with regard to the protection of safety and
healthiness.
DIN EN 60335-1:2012
DIN EN 60335-2-97:2010
DIN EN 62233:2008
Schoenberger Germany Enterprises GmbH & Co. KG
Zechstraße 1-7
82069 Hohenschäftlarn
21.02.2017